Due to the relatively weak adhesion between the adhesive layer and the paint surface in the initial stage after windshield film application, we recommend visiting a service center for a follow-up inspection and reinforcement of the edges (if necessary) within three days after installation; additionally, please refrain from driving on highways, washing your vehicle, exposing the film to rain, or allowing the product to become exposed to significant moisture for one week. If you notice slight edge curling, please visit the installation service center as soon as possible for repair; if any corrosive substances such as oil stains, bird droppings, or tree sap adhere to the surface, wipe them clean promptly, but be careful not to wipe along the edges of the film.
During the early post-installation period, blistering or water bubbles may appear on the film surface—this is normal and will naturally disappear after approximately 10 days.
When cleaning the vehicle, avoid using high-pressure water jets to rinse the edges of the product.
Avoid using brushes, hard objects, or similar tools to wipe the surface of the product.
Do not clean the product using strong alkalis, strong acids, volatile solvents, or other corrosive chemicals; for stain removal, it is recommended to use professional care waxes or degreasing waxes.
It is recommended to perform routine maintenance on the membrane surface every two to three months.
Do not polish the product; do not use grinding agents or tools containing grinding agents to treat the product surface.
Please do not leave your vehicle outdoors in direct sunlight for extended periods, as this may affect the product's service life.
Please do not park your vehicle under trees; bird droppings, insect resin, and tree gum are highly corrosive and can easily damage the film surface coating; if any of these substances adhere to the surface, they must be cleaned promptly.
Do not park your vehicle for an extended period directly under the range hood exhaust fan; otherwise, a large amount of oil residue may accumulate on the coating surface, making it difficult to clean;
Do not park your vehicle for an extended period in areas where air conditioning vents discharge water, as corrosive condensation from the air conditioner may damage the coating structure;
Do not leave your vehicle parked in rainwater for prolonged periods, as the acidic substances in rainwater can erode the coating surface; if your city experiences severe acid rain, you should wash your car as soon as possible after exposure to rain.